GREEN-BEAM SELF-LEVELING TWO-PLANE LEVELING AND ALIGNMENT-LINE LASER • Green Beam Laser —more brighter than standard red beams • Two 360° Plane（Horizontal and Vertical ） — For a wide array of level and vertical alignment applications • Self-levels and indicates out-of-level condition; locks when switched off • Manual Mode — Locks lines for use at any angle • Includes Positioning Device with strong magnets • Laser unit: Osram • Wavelenght: 520nm • Beam Accuracy: H/V Line ±3mm/10m • Expanded Angle: H&V 360° • Max. working distance: 30m(without detector) • Power Supply: 4xAA battery • Operating time: 1C: 8h /2C: 4h • Ingression Protection Rate: IP54 • Operating Temperature: -10°C – +50°C • Storage Temperature: -20°C – +70°C • Pulse function • Model Function: switchable manual model

TOLSEN LASER DISTANCE MEASURER 80M (35178)TOLSEN LASER DISTANCE MEASURER 80M (35178)

LASER DISTANCE METER • Size: 120×48.5×28.5mm • Functions: distance measurement, area measurement volume measurement, pythagorean measurement, addition and subtraction calculation, continuous measurement, 20 groups of data storage • Drop-resistance 1.5m • Horizontal bubble • Adjustable baseline switch • Measuring units: m//in • Measuring accuracy: ±2.0mm • Battery type: 2xAAA(1.5V) • Battery life: 5000 measurements • Backlight • Features: tiny size extremely easy to use so rubber housing 1.6 inch screen (black-on-white)

LASER DISTANCE METER • Material: ABS & Rubber • Size: 100×32.5x22mm • Functions: Measures distance / area / volume • Measuring range: 0.2-20m / 0.65-65.5ft • Meausring accuracy: ±2mm • Measuring units: m / ft • Battery type: 2xAAA 1.5V • Battery life: 5000 measurements • Backlight • Extremely easy to use

L-TYPE WRENCH • Forged steel,heat treated • Mirror polished, chrome finish

L-TYPE WRENCH • Forged steel,heat treated • Mirror polished, chrome finish

L-TYPE WRENCH • Forged steel,heat treated • Mirror polished, chrome finish

L-TYPE WRENCH • Forged steel,heat treated • Mirror polished, chrome finish

L-TYPE WRENCH • Forged steel,heat treated

L-TYPE WRENCH • Forged steel,heat treated

L-TYPE WRENCH • Forged steel,heat treated

TOLSEN HYDRAULIC TROLLEY JACK 2T (65462)

HVLP FLOOR BASED SPRAY GUN • 220-240V~, 50Hz, 650W • Paint Reservior: 800ml • Max. Flow: 800ml/min • Max. Viscosity: 60din/sec • Nozzle: Φ1.8/2.6mm • Cable length: 2.0m • Accessories: 1pc viscosity measuring cup 1pc 2.6mm nozzle 1pc shoulder belt 1pc cleaning pin

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS (INCH) • HSS/M35 (Co5%), ASME B.94.11M • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS (INCH) • HSS/M35 (Co5%), ASME B.94.11M • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

M35 HSS TWIST DRILL BITS • HSS/M35 (Co5%), DIN338 • Fully ground • 135° split point

19PCS BLACK & GOLD HSS TWIST DRILL BITS SET • HSS/M2,DIN338 • High Speed Steel features a gold shank and black flute • 130°Split point • 3-flatted shank on 5mm and above for better chuck grip

HOSE REEL • Material: PP • Fits hose size up to 1/2″x45m • Folding handle • Simple click and lock assembly

HOLE SAW • Cutting depth:38mm • HSS M3 Bi-metal • Veriable teeth 4-6TPI 152mm,6"

TOLSEN HOLESAW BIMETAL 127MM (75827) • Cutting depth:38mm • HSS M3 Bi-metal • Veriable teeth 4-6TPI

TOLSEN HOLESAW BIMETAL 114MM (75814) • Cutting depth:38mm • HSS M3 Bi-metal • Veriable teeth 4-6TPI

TOLSEN HOLESAW BIMETAL 102MM (75802) • Cutting depth:38mm • HSS M3 Bi-metal • Veriable teeth 4-6TPI

TOLSEN HOLESAW BIMETAL 95MM (75795)

TOLSEN HOLESAW BIMETAL 86MM (75786)